Click here to buy Acetal Rod

PVC Datasheet:

Properties	Unit	Method
Density	g/cm3	527 / D 792	1.41
Tensile strength at yield	MPa	527 / D 638	60
Tensile strength at break	MPa	527 / D 638
Elongation at break	%	527 / D 638	30
Modulus of elasticity in tension	MPa	527 / D 638	2700
Modulus of elasticity in flexture	MPa	178 / D 790
Ball indentation hardness	MPa	2039 / 1	145
Impact Strength	kj/m2	179 / D 256	no br.
Creep rupture strength after 1000 hrs with static load	MPa		40
Time yield limit for 1% elongaction after 1000 hours	MPa		13
Coefficient of friction against hardened and ground steel p = 0,05 N/mm2, v = 0,6m/s	-		0.32
Wear conditions as above	um/km		8.9
Crystalline melting point	°C	DIN 53 736	plus 165
Glass transition temperature	°C	DIN 53 736	-60
Heat distortion temperature Method A Method B	°C °C	plus 110 plus 160
Max. service temperature Short term Long term	°C °C		plus 140 plus 100
Coefficient of thermal conductivity	W/(m K)	DIN 52612	0.31
Specific heat	J(g K)		1.5
Coefficient of thermal expansion	10-5/K	DIN 53 752	10
*Dielectric constant at 105 Hz		DIN 53 483	3.5
*Dielectric loss factor at 105 Hz		DIN 53 483	0.003
Specific volume resistance	Ω cm	DIN 60093	1014
Surface resistance	Ω	DIN 60093	1014
Dielectric strength 1mm	kV/mm	ASTM 149	>50
Tracking resistance		53 480	KA 3c
Moisture absorption: Equilibrium in standard atmosphere (plus 23°C / 50 % relative humidity)	%	62	<0.3
Water absorption at saturation at plus 23°C	%	62	0.5
Resistance to hot water, washing soda			limited resistance
Flammability		DIN 4102	HB
Resistance to weathering			not resistant